VERIFIED SOLUTION i

Setting up a wired network connection on the DM475

Products affected: DM475™
Watch this video or follow the steps below to learn how to set up a wired network connection:



Follow these steps to set up a wired network connection:
  1. Turn the meter off using the switch on the back of the meter.
  2. Connect the Ethernet cable to an active network port and to the back of the meter.
  3. Turn the meter on using the switch on the back of the meter.
  4. Press Menu.
  5. Press Page Down twice.
  6. Select Data Center Options.
  7. Press Page Down.
  8. If the Connection Method is not already set to Auto, select the button next to Connection Method to change it to Auto.
  9. Check the connection by performing a balance inquiry: 
    1. Press the Refill Postage button.
    2. Select Check PBP Balance.
  10. If the balances are displayed, the connection was successful. Select Continue to return to the Home screen.
UPDATED:  May 28, 2019