VERIFIED SOLUTION i
X

Software Update Instructions for DM300, DM400, DM450, DM475

UPDATED: October 31, 2017


The following is for software update instructions for DM300c™, DM400c™, DM450c™, DM475™; below software version 2.12.0052. 

icon TIPS:
  • This update will take between 15 and 25 minutes to complete depending on your connection method.
  • During peak periods, heavy network traffic may require several connection attempts.
  • Some steps below may vary slightly from what you see on your meter. If so, follow the meter prompts to complete the update.

Software Update Instructions:
  1. Connect your meter using one of the following options:
    • Local area network (LAN)
    • Analog phone line that is not shared with a fax or other device
    • Internet connection via a PC and PC Meter Connect desktop application
  2. At your meter, conduct a balance inquiry.
  3. Press the Refill Postage key.
  4. Select Check PBP Balance option.
  5. Your meter will connect with the Pitney Bowes Data Center and display several messages.
  6. When the connection is complete, your Postage By Phone balance will appear.
  7. Press the Continue option to proceed to the next screen, then select the Enter key. Note: Depending on the type of accounting your meter is using, this step may not appear.

    Warning: Do not unplug your power cord or remove the network cords from your meter while updating. This may cause damage to your meter. However, if your meter has been unresponsive for more than 20 minutes, you may disconnect the power cord, wait one minute, plug it back in, and restart the update process.
  1. Download and install software update. Depending on your meter's configuration a variation of message to prompt you to download will display. Select Download Now.
  2. The update will take 15-25 minutes to complete depending on your connection method. Your meter will display the status of the download. After the "% Complete reaches 100%", the meter will display several messages while it prepares the new software. The system will automatically restart to install the update (this will take up to 5 minutes), and automatically return to the Home screen when the installation is complete.
  3. (Optional): To ensure the update is complete, repeat Steps 2 – 3 again.

Environment Details

Products affected: DM300c™, DM400c™, DM450c™, DM475™

Downloads

  • No Downloads