VERIFIED SOLUTION i
X

"No print head detected" on the DM100i-DM200i and DM110i-DM220i

Issue

The message No print head detected is displayed. The meter will not print postage.

Cause

The print head is missing from the meter or is faulty.

Resolution

UPDATED: 4 October 2018


Follow these steps to check the print head:
  1. Remove ink cartridge and print head from meter. For instructions, see article "How to replace the print head on the DM100-DM200 and DM110i-DM220i".
  2. Check for bent pins on the meter wall. These are brass pins that resemble staples. They are located underneath the ink cartridge.
Image showing location of Pins that may be bent
  1. If any of the pins are bent, contact Technical Support.
  2. If the pins are not bent, place the print head and the ink cartridge back into the meter. For instructions, see article "How to replace the print head on the DM100-DM200 and DM110i-DM220i".
  3. Close the latch and the top cover.
Image showing latch and top cover close

Environment Details

Products affected:
DM100™ / DM150™ / DM200™ (P720)
DM110i™ / DM160i™ / DM220i™ (PR20)

Downloads

  • No Downloads