Poor print quality or no printing on the mailstation series

• Your meter does not print well or at all.
• Your meter displays the error code P2B82.

• Lack of Use, which causes blocked printer nozzles in your print head or dried ink
• Ink Issues:
  • Non-compliant ink cartridges can cause poor quality printing. (See Terms and Conditions.)
  • Empty ink cartridges can prevent printing
• Overuse, which causes accelerated wear and tear

• Solution 1: Watch the video
• Solution 2: Check your ink cartridge
• Solution 3: Run a test pattern to assess print quality and perform printer maintenance to clean printer nozzles
• Solution 4: Clean your printhead

Solution 1: Watch the video

Solution 2: Check your ink cartridge

1. Make sure that you use a genuine Pitney Bowes ink cartridge.
2. If you need ink, order a genuine Pitney Bowes replacement ink cartridge:

mailstation2™


mailstation™

 

Solution 3: Run a test pattern to assess print quality and perform printer maintenance to clean printer nozzles

1. Press Menu.
2. Press Review (down) until you see Use ink functions?
3. Press Enter/Yes.
4. Press Review (down) until you see Print test pattern?
5. Press Enter/Yes.
6. When prompted, insert an envelope or tape sheet into your meter.
7. When prompted, remove the envelope.
8. At the prompt Is test pattern OK?, select the appropriate option:

• If your test pattern looks good, press Enter/Yes. Your meter returns to the main screen.
  
• If your test pattern is poor, press No.
  
  1. Your meter cleans your printer nozzles.
  2. When your meter finishes the cleaning, go to Step 4 to run another test pattern. Repeat this process up to 3 times, if your print quality improves.

Solution 4: Clean your printhead

1. Lift to open the cover, and then close the cover again.
2. When the message, Do you want to install new ink? displays, press Enter/Yes.
3. Reopen the cover and wait until the ink assembly moves to the front of the machine.
4. Press the lock button on the green ink cartridge cover to release the ink cartridge.
   
5. Remove the ink cartridge and set it aside.
6. Squeeze the latches holding the printhead cover in place and lift the printhead cover.
   
7. Lift the printhead out of the machine.
   
8. Clean the printhead with a soft, lint-free cloth.
9. Put the printhead back into the machine.
   
10. Close the printhead cover, making sure that it clicks into place.
    
11. Replace the ink cartridge with the circle on the bottom of the cartridge facing you.
12. Close the ink cartridge cover, making sure that it clicks into place.
    <
13. Press Enter/Yes when you see the prompt IMPORTANT: Is ink installed?.
14. When prompted, insert an envelope or tape sheet into your meter.
15. When prompted, remove the envelope.
16. At the prompt Is test pattern OK?, select the appropriate option:
    • If your test pattern looks good, press Enter/Yes. Your meter returns to the main screen.
      
    • If your test pattern is poor, press No.
      
      1. Your meter cleans your printer nozzles.
      2. When your meter finishes the cleaning, go back to Step 14 to run another test pattern. Repeat this process up to 3 times, if your print quality improves.