Skip to main content
Related Search Topics: Rate Change Features & Settings
Print this support article

The default job does not update after a rate download on the Connect+ series and SendPro P series

This process to resolve your default job not updating after a rate download on the Connect+ 500W, Connect+ 1000, Connect+ 2000, Connect+ 3000, SendPro P1000, SendPro P1500, SendPro P2000, and SendPro P3000 sets the default job as a first class letter. Substitute another class of mail as the default if a first class letter is not your preference.
Products affected: Connect+® 500W, Connect+® 1000, Connect+® 2000, Connect+® 3000, SendPro® P1000, SendPro® P1500, SendPro® P2000, SendPro® P3000

Issue

The default job does not update after you download your rate change file.

Cause

Your job is not set up for use with a class of mail.

Resolution

This process sets the default job as a first class letter. Substitute another class of mail as the default job if you prefer.

Follow these steps to resolve your issue by setting the default job as a first-class letter:
  1. Press Run Mail from the Home screen.
  2. Select Class.
  3. Select First Class.
  4. Select First Class Letter.
  5. Select OK.
  6. ​Select Save as... when the Main Run screen displays.
  7. Name your job.
  8. Select the Home icon.
  9. Select Jobs.
  10. Select the job you just saved.
  11. Select Options.
  12. Select Make this job the default job.
  13. Select the Home icon.
  14. Select Run Mail.
  15. Select Start Over. The Main Run screen now displays the correct amount.
Use the Contact Us options below if you need further assistance. Have your model and serial number ready.

UPDATED: December 09, 2021