Loading the High Capacity Envelope Feeder on the Relay 4500

Learn how to load the High Capacity Envelope Feeder on the Relay 4500.
Products affected: Relay™ 4500

The Relay 4500 uses a high capacity (elevator style) envelope feeder to feed the outer envelopes.

  1. Press the envelope feeder loading switch to lower the envelope feeder platform.env-load-1
  2. Use the side guide adjustment knob to adjust the side guides to the width of the envelopes. Once the guides are touching both sides of the envelope, turn the adjustment knob 1/4-turn in the opposite direction. This sets the correct clearance between the guides and the envelope. env-load-2
  3. Aerate the stack of envelopes and fan it so the individual envelopes are not stuck together.env-fan
  4. Place the stack of envelopes into the feeder with the flap side UP and flap LAST.
  5. Press the envelope feeder loading switch again to raise the envelope stack to the normal feeding position.
    env-load3

Loading envelopes without stopping the inserter

Shown here on the Relay 4500 with a high capacity (elevator style) envelope feeder.

  1. Press the envelope feeder loading switch to lower the feeder platform.env-load-4
  2. Load envelopes as described earlier in this section.
  3. Press the envelope feeder loading switch again. The envelope stack rises to the normal feeding position and continues to process automatically.

UPDATED: August 14, 2021