VERIFIED SOLUTION i

Sealing Envelopes on the SendPro C, SendPro+

Products affected: SendPro® C, SendPro®+ (8H10)

This procedure describes how to seal envelopes whether you are printing postage on the envelopes or only sealing the envelopes (no-postage).

  1. Check the level of sealant in the moistener tank and add more if required.
  2. When feeding an envelope, be sure to slide the envelope flap under the edge of the feed deck, so the moistener can wet the flap.

    seal-envelopes-position-a_500x319

    seal-envelopes-position-b_500x281

Note: If the moistener tank is full and your envelopes do not seal correctly, clean or replace the moistener brush and wick.
UPDATED:  August 27, 2019