Setting up a wireless (WiFi) network connection on the SendPro C, SendPro+

Products affected:
SendPro® C, SendPro®+ (2H20)
For information about the connection settings required on your network, contact your IT department. Refer to the SendPro C, SendPro + Connectivity Guide for specific requirements.
  1. Tap the Settings (gear) icon in the global toolbar.
  2. Tap Wi-Fi in the Device & Network section.
  3. Choose your WiFi network from the list. If your WiFi network is hidden, tap Add Network to add it.
  4. Enter your WiFi password and identity.
Tip: Use the show password option to make sure that the password is entered correctly.
  1. If your network requires advanced network settings such as a proxy server or static IP address, tap Advanced Options:
  • To set up a proxy server:
  1. Select Use Proxy.
  2. Tap on the line and enter the information provided by your IT department.
  • To set up a Static IP address:
    1. Select the IP Setting menu and choose Static.
    2. Tap on the line and enter the value provided by your IT department.
    3. Tap the > in the green circle.
If the meter will not connect to the WiFi network, have the client test the WiFi network and password by setting up a smart phone, laptop or other WiFi enabled device.

If you are unable to connect to the internet, if you get authentication errors, or you are unsure of the correct settings for your network, check with your IT department.
UPDATED:  20 September 2019