Sealing envelopes on the SendPro C, SendPro+

Products affected:
SendPro® C, SendPro®+ (2H20)
This procedure describes how to seal envelopes whether you are printing postage on the envelopes or only sealing the envelopes (no-postage). If you are only sealing envelopes, refer to Sealing the envelope only - (bypass all printing)
  1. Check the level of sealant in the moistener tank and add more if required. Refer to Filling the moistener tank for detailed steps.
  2. When feeding an envelope be sure to slide the envelope flap under the edge of the feed deck, so the moistener can wet the flap.
User-added image
User-added image
Note:  If the moistener tank is full and your envelopes are still not sealing correctly, clean or replace the moistener brush and wick. Refer to Cleaning the moistener brush and wick assembly for detailed steps.
UPDATED:  20 September 2019