Sealing the envelope only (bypass all printing) on SendPro C, SendPro+

Products affected:
SendPro® C, SendPro®+ (2H20)
Refer to Sealing envelopes for the correct way of feeding envelopes to ensure they are sealed properly. 
  1. Tap Envelope Printing on the Home screen.
  2. Tap Print Mode on the lower left side of the Envelope Printing screen. You may have to swipe up on the screen to see this option. 
  3. Select Seal Only.
  4. Tap Apply.
  5. Place the first envelope face up, flap down into the feeder. Be sure to slide the envelope flap under the edge of the feed deck.
UPDATED:  20 September 2019