Replacing the inkjet cartridges on the AddressRight 100, 200, and 300

Learn how to replace the inkjet cartridges on the AddressRight 100, 200, and 300.
Products affected: AddressRight® 100 Printer, AddressRight® 200 Printer, AddressRight® 300 Printer
  1. Open the latch lever to remove the used cartridge from the cartridge holder. Pull the cartridge up and out of the holder.
    Install Inkjet Cartridges_175x132
  2. Remove the new cartridge from packaging. Take care not to touch the copper contacts, metal plate, or gold printhead. Remove the protective tape from the printhead.
  3. With the cartridge’s printhead pointing down, slide the cartridge into the holder. Push down and toward the contacts in the holder.
  4. Make sure that the cartridge is seated in the holder. Close the latch lever to secure the cartridge. DO NOT force the latch lever into place.
    Install Inkjet Cartridges_1_174x131
  5. Repeat for remaining cartridges.

WARNING-ISO

Caution: Never shake, drop or hit cartridges against the palm of your hand or any other hard surface. Shaking the print cartridge does not mix ink and hitting cartridges against a hard surface does not clear the nozzles. These actions hurt print quality because they allow bubbles to form near the ink firing chambers. These bubbles prevent the nozzles from firing, causing white streaks in print image.

 

UPDATED: August 14, 2021