Installing an MT30 or MT70 external scale on the SendPro C, SendPro+

Products affected: SendPro® C, SendPro®+ (2H20)
  1. If you are using the integrated scale that is located on top of the machine, remove the scale by it lifting off.
Integrated scale on top of the device
integrated scale removed from the top of the machine
  1. Fit the blanking plate on the machine where the scale was located.
Blanking plate
Blanking plate fitted to the machine
  1. Tap the Settings (gear) icon in the global toolbar.
  2. Scroll down and tap Scale Installation Guides.
  3. Swipe to the left and select the scale you are installing.
  • Tap USB large capacity 30 lb / 12 KG scale if you are installing the MT30 scale.
  • Tap USB large capacity 70 lb / 35 KG scale if you are installing the MT70 scale.
  1. Tap Continue.
  2. Following the on screen instructions, swipe to the left and unbox the MT30 / MT70 scale.
  3. Position and level the scale. The scale has a level bubble under its lid. Ensure the bubble is within the circle of the level bubble by adjusting the round feet of the scale.
  4. Connect the large end of the USB cable into the machine and the other end into the scale.
  5. Tap Continue
  6. Tap Verify.
  7. Tap Got It.
  8. Tap Envelope Printing.
  9. Tap the weight button then tap the Scale button.
  10. Place your mail on the scale.
  11. Tap Apply.
UPDATED:  20 December 2019