Updating USPS rates on the mailstation series (K700, K705, K7M0)

Products affected: mailstation™ (K700, K705), mailstation2™ (K7M0)


Note: Screens may vary, depending on your meter's software version.

Follow these steps to update your USPS rates:
  1. Press Menu.
  2. Press Review (up arrow) until your meter says Connect to Pitney Bowes? and then press Enter/Yes.
  3. When prompted to perform an update, press Enter/Yes.
Warning: Do not unplug the power cord or remove the network cords from the meter while updating. 
  1. Press Enter/Yes when your meter says Download Complete.
  2. Press Enter/Yes.
  3. Select No when prompted to print the download report.
  4. Press Enter/Yes.
  5. Select No when prompted for the rates reminder.
  6. Wait for one hour.
  7. Click the blue Confirm Meter Update button for your meter to confirm that your update installed successfully:
Confirmation button
   mailstation (K700, K705)
Confirmation button
   mailstation2 (K7M0)

IMPORTANT: If your meter prompts you to connect on January 26 or after, please follow the instructions.

Related article
UPDATED:  December 5, 2019