VERIFIED SOLUTION i

Creating a default preset on the DM50-DM60

Products affected:
DM50™ / DM55™ (K721)
DM60™ (K722)
A preset is a snapshot of meter settings that are most commonly used. It creates what is known as a defaultIf the preset feature is enabled, the meter shows the preset values when it is turned on or 'wakes up' after sleep mode.

Watch this video or follow the instructions below to learn how to save a preset.




Note: To use a preset, the preset feature must first be enabled.  See article "How to turn the preset feature on and off on the DM50/DM55 and DM60" for instructions.

Note: The meter can only hold one preset. To edit the current preset, create a new preset to replace the existing one.

To create a new meter preset, you first need to select the desired settings on your meter: carrier, class, mail type, envelope message.
  1. From the Home screen, press the Review (down) key to see what options are currently selected.
    • Class and Mail type (Letter, Large Letter, etc)
    • Account (if the meter's Accounting feature is enabled)
    • Ad (Envelope Message)
  2. If you are happy with these settings, proceed to step 3. Otherwise, from the Home screen, press Enter/Yes to select new values:
    • Carrier
    • Class
    • Mail type (Letter, Large Letter, etc)
    • Ad (Envelope Message)
  3. Follow these steps to save these settings as a preset on your meter:
    1. Press Menu/Options
    2. Press Review (down) until Change setup? is displayed. Press Enter/Yes.
    3. Press Review (down) until Use preset setup? is displayed. Press Enter/Yes.
    4. When View stored preset? is displayed, press No.
    5. When Store new preset? is displayed, press Enter/Yes.
    6. When Review settings to be stored? (yes/no) is displayed, select one of the following options:
  • Enter/Yes if you want to review the current settings.
  • No to go to the next step without reviewing the settings.
  1. Press Enter/Yes to confirm the storing of the new preset.
  2. When View new preset? is displayed, press No.
  3. When Stay in setup? is displayed, press No. The meter returns to the Home screen.
UPDATED:  30 July 2019