Setting up a wired connection using a USB Ethernet network adapter on the DM125 and DM225

Learn how to set up a wired connection using a USB Ethernet network adapter on the DM125 or DM225.
Products affected: DM125™, DM225™
  1. Turn your meter off using the power switch on the back of the meter.
  2. Connect one end of your Ethernet cable into the USB Ethernet adapter and the other end into the wall outlet or router.
  3. Plug your USB Ethernet adapter into one of the USB ports on the back of the meter.
  4. Turn the power on using the switch on the back of your machine.
  5. Press Options once your meter turns on.
  6. Press Page Down twice.
  7. Select Connect-Data Center.
  8. Select LAN Settings.
  9. Select Get IP:
    1. Select Automatically if you use a dynamic IP address.
    2. Select Manually if you use a static IP address. Consult with your IT department for the correct address. See the DM Series LAN Connection Setup Guide for networking details.
  10. Press Home.
  11. To verify your connectivity, check your balance:
    1. Press Add Postage.
    2. Select Check PBP balance. If your postage totals display, the installation is complete.
  12. Press No to return to the Home screen.
If you are unable to connect to the internet, ask your IT department or internet provider to check the internet settings before you contact Pitney Bowes. If you need further assistance, please chat with us.

UPDATED: July 11, 2023