How to fill the sealer bottle on the DI900, DI950, and Relay 5000-8000

Learn how to refill the sealer bottle on the DI900, DI950, Relay 5000, Relay 6000, Relay 7000, Relay 8000
Products affected: DI900™, DI950™, Relay™ 5000, Relay™ 6000, Relay™ 7000, Relay™ 8000
There are two visual cues to indicate that it is time to refill the fluid in the sealer.
  • The liquid in the bottle is at or below the refill line.
  • A warning message appears on the display.

Follow these steps to refill the sealer bottle:
  1. Remove the bottle from its holder on the system and place it on a flat surface.
  2. Unscrew and remove the pressure-sensitive top from the bottle.
  3. Pour sealant into the bottle until it reaches the fill line.
  4. Screw the pressure-sensitive top securely back onto the bottle.
  5. Wipe off any fluid that spilled.
  6. Put the bottle back into its holder.
Note: If filling the sealer for the first time, or if the sealer was completely empty, allow time for solution to soak through the sealer mechanism before processing material.

UPDATED: 04 April 2022