How to add postage to the Connect+ 500W, Connect+ 1000, and more

Learn how to add postage to the Connect+ 500W, Connect+ 1000, Connect+ 2000, and Connect+ 3000.
Products affected: Connect+ 500W™, Connect+ 1000™, Connect+ 2000™, Connect+ 3000™
  1. You can access the Funds application by:
    • Selecting the Funds button on the Home screen, or
    • Selecting Add Postage to Meter when you receive a low funds warning or an insufficient funds error in the Run Mail screen
  2. The Funds screen displays. If necessary, select the Meter Funds tab.
  3. Select the Add Postage to Meter button
  4. Select the appropriate refill amount option:
    • To add the same postage amount that was used during the last refill, select the Last refill amount button
    • To add the default postage amount, select the Default refill amount button
    • To add a different postage amount, select the Other amount button. Enter the refill amount and then select the OK button.
      • NOTE:  The maximum and minimum postage refill amounts for your system are listed on the Meter information tab
  5. When prompted, select Confirm. The system connects to the PB Postage service and begins to add the postage to your meter.
  6. The system will notify you when it completes adding your postage. If you want to print a receipt, select the Print receipt button.
    • To print the receipt on an envelope, place an envelope on the feed deck, and select the Start button
    • To print the receipt on a piece of tape, select the Tape button
  7. Select Done to exit the Funds application

UPDATED: 14 August 2021