Products affected: DI900™, DI950™, Relay™ 5000, Relay™ 6000, Relay™ 7000, Relay™ 8000
To load media into a Sheet Tray:
- Fan the material to be inserted to insure that the items do not stick together and feed properly. Tamp the material in order to create a straight stack.
- Using the blue Side Guide Adjuster wheel, open the sides of the Tray wide enough to clear the width of the material.
- Lift the Separator and load material into the Tray.
NOTE: Do not load material above the maximum fill line in the tray
- Using the Side Guide Adjuster, move the Side Guides in until they lightly touch the material on both sides. When you release the Adjuster, the Guides will automatically spring back to a position that will allow for proper clearance during feeding of the material in the Tray.
NOTE: Side Guides only spring back after they are moved inward.
UPDATED: 28 April 2020