Manufacturing Mode

DM100i/DM125/DM200L/DM225 (DM100/125/200/225) DM300c/ DM300M (DM300)

Issue

The Meter screen is showing message- "Manufacturing Mode".

Cause

This issue is caused by a software fault.

Resolution

UPDATED: 9 September 2019
To resolve this issue:
  1. Turn the franking machine off.
  2. Wait 30 seconds.
  3. Turn the franking machine back on and wait for it to initialise.

If unresolved please contact Technical Support using the Contact Us options below.