System Fault 'FLASH NEEDS INIT'


DM100i/DM125/DM200L/DM225/DM220i (DM100/125/200/225) DM300c/ DM300M (DM300) DM50/DM60 (K700)

Issue

The Meter displays System Fault 'FLASH NEEDS INIT'.

Cause

This issue is due to a software fault.

Resolution

UPDATED: 9 September 2019
  1. Turn the franking machine off.
  2. Wait 30 seconds.
  3. Turn the franking machine back on and wait for it to initialise.

If unresolved please contact Technical Support using the Contact Us options below.