Products affected: DI900™, DI950™, Relay™ 5000, Relay™ 6000, Relay™ 7000, Relay™ 8000
The inserter is displaying error code 203 Feeder empty: D and has stopped.
Tray D has run out of material.
ResolutionUPDATED: December 12, 2017
- Load more material into tray D.
Note: To check the loading directions, select Loading Directions and Pre-Run Adjustments on the job screen.
- Verify that the side guides are set correctly. There should be approximately 1/8th inch on either side of the material.