"Inspection Due" or "Inspection Required" message on DM100i-DM225

Products affected: DM100®i, DM125™, DM200L™, DM225™
USPS® regulations require that your meter be inspected periodically. This inspection occurs automatically when you connect your meter to the Pitney Bowes Data Center to refill postage or perform a balance inquiry.

If you do not connect your meter to the Pitney Bowes Data Center within a 90 day period, your meter displays an "Inspection Due" message. After 120 days, your meter displays an "Inspection Required" message. You must clear these messages before you can operate your meter.



Before you begin
Make sure that your meter is connected to the internet using 
  • PC Meter Connect
  • a SmartLink™ device (DM100®i, DM200L™) 
  • a USB Ethernet adapter (DM125™, DM225™)  
  • a dial-up phone connection
to communicate with the Pitney Bowes Data Center.

Solution 1
  1. Select Connect now. (If your meter does not say Connect now, skip to Solution 2.)
  2. Select Continue.
  3. Select Check PBP Balance
  4. Press No to return to the Main screen. Your inspection message should be gone.
Solution 2
If you don't see Connect now on your meter displayfollow these steps to clear your message:
  1. Press Add Postage.
  2. Select Check PBP Balance.
  3. Press No to continue without adding postage. Your meter checks for available updates.
  4. Select Get update now if updates are available. 
  5. Select Continue after your updates get installed. Your inspection message should now be cleared.
  6. Press the Normal Preset button to return to your default settings.
Use the Contact Us options below, if you need further assistance.

Related articles:
UPDATED:  December 4, 2019