Adding postage to the Connect+ series and SendPro P-Series

Products affected: Connect+® 500W, Connect+® 1000, Connect+® 2000, Connect+® 3000, SendPro® P1000, SendPro® P1500, SendPro® P2000, SendPro® P3000
Before you add postage to your meter, you must have funds available in your Reserve Account or USPS® prepaid account, or be using Purchase Power®.
  1. Access the Funds screen by using one of the following methods:
    • Select Funds on the Home screen.
    • Select Postage in meter at the bottom of the Run Mail screen.
    • Select Add Postage to Meter or Refill My Meter when you receive a low funds warning or an insufficient funds error.
Note: If there is a lock symbol next to Add Postage to Meter you do not have rights to refill the meter. 
  1. On the Funds screen, select the Meter Funds tab, then select Add Postage to Meter or Refill my Meter.
  1. Select the appropriate refill amount option:
    1. To add the same postage amount that was used during the last refill, select Last refill amount.
    2. To add the default postage amount, select Default refill amount.
    3. To add a different postage amount, select Other amount. Enter the refill amount and select OK.
  1. When prompted, select Confirm. The meter connects to the Pitney Bowes Data Center, adds the postage and notifies you when it is finished.
  1. If you want to print a receipt, select Print receipt:
    1. To print the receipt on an envelope, place an envelope of the feed deck, and select Start.
    2. To print the receipt on a piece of tape, select Tape.
    3. If you have an optional attached printer, select Print on document.
  2. Select Done to exit the Funds application.

Related Articles
Paying for Postage
Resolve connection issues on the Connect+ series and SendPro P series
UPDATED:  March 8, 2019