How to set up folding non-standard sized paper in the DF400

Products affected: DF400
Non-standard sheet sizes require that each fold plate setting be measured from a sample sheet.

Note: There is a 280mm ruler on the side of the folder that can be used to measure folds.

To set up the DF400 to fold a non-standard size:
  1. Fold a sheet by hand.
  2. Unfold the sheet and hold it face up with the leading (top) edge to the left.
  3. Measure the shaded panel shown in the illustration under Dimension A and set dimension A accordingly.
  4. Measure the shaded panel shown in the illustration under Dimension B and set dimension B accordingly.
Fold Chart
UPDATED:  December 12, 2017