How to fill the sealer bottle on the DI900, DI950, and Relay 5000-8000

Products affected: DI900™, DI950™, Relay™ 5000, Relay™ 6000, Relay™ 7000, Relay™ 8000
There are two visual cues to indicate that it is time to refill the fluid in the sealer.
  • Liquid in the bottle is at or below the refill line
  • A warning message appears on the display
Follow these steps to refill the sealer bottle:
  1. Remove the bottle from its holder on the system and place it on a flat surface
  2. Unscrew and remove the pressure-sensitive top from the bottle
  3. Pour sealant into the bottle until it reaches the fill line
  4. Screw the pressure-sensitive top securely back onto the bottle
  5. Wipe off any fluid that spilled
  6. Put the bottle back into its holder
Note: If filling the sealer for the first time, or if the sealer was completely empty, allow time for solution to soak through the sealer mechanism before processing material.
UPDATED:  April 24, 2020